22-24 Cummins Cab & Chassis is now available on the HP Tuners platform!

NOTE: Average turnaround on these is 1-3 business days so it is fine if your customer comes by and you perform steps 1 and 2 and the customer returns for the remaining steps later.

The latest HP Tuners BETA VCM suite MUST Be used. (Update before proceeding).

This requires swapping the ECM to a 19-21 year model ECM.

About 50% of these are needing to be bench flashed. We recommend that you have a Bench Force ROM boot bench unit. These are handy to be able to bench flash anything you purchase connectors for. Link:

https://bench-force.com/collections/starter-kits/products/benchforce-starter-kit-for-popular-cummins-dodge-diesel-engines?variant=41416234729663

If you are purchasing ECM and/or MPVI from us then you can put ON ORDER in the number field on this order number and include that information when you send in your reads to sales@amdieselperformance.ca on step 2. 

The only available power option for tuning at this time is SINGLE POWER LEVEL.

No Shift on the Fly

Instructions:

1. With the original ECM installed pull a read with your MPVI3 device.
2. Email the read into us with the order number and ECM S/N on the sticker of the new ECM.
3. You will receive an email back with your tune file in 2-3 business days.
4. Disconnect batteries and install new ECM.
5. Reinstall Batteries after ECM installed.
6. Place the key in the RUN position ( make sure the engine is not running)
7. Install the bypass cable and MPVI3 device into the OBD
8. Open the tune file we provided via email and WRITE ENTIRE to the truck.
9. Once the truck is tuned, HP will prompt you to turn the key off then on. Do NOT turn the engine over. Leave the key in the on position for seconds and then start the truck.